North Alabama Sand & Gravel has kept the building construction industry supplied with a quality natural sand product for the block and masonry segments of the industry.

Product 101 - Masonry Sand: (1/8" to #200)
This is a clean natural sand product that has been processed thru our wash plant and contains particle sizes within the following ranges.100% passing #8 sieve and less than 1% passing #200 sieve. This product has a wide range of applications but is processed primarily for the use in mortar mix for brick and block lying.
2008 Masonry Sand Certification

Product 106 - Bank Run Sand: (1/2" to #270)
This is a natural sand product that is excavated straight out of the bank; this product is not screened or washed and is commonly used as a backfill.

North Alabama Sand & Gravel has been supplying the asphalt industry with quality natural sand products for over a decade, and strive to service our customer’s with the products they need.

Click Here for Asphalt Product Photos

Product 103 - Dry Screened Asphalt Sand: (1/4" to #200)
This is a clean natural sand product which has been processed thru our dry screen and contains the following particle sizes. 99% passing #4 sieve and around 4% passing #200 sieve. This product is used primarily for commercial and private mix design asphalt projects.

Product 111 - Concrete Sand Non-Spec: (1/4" to #100)
This is a clean natural sand product that has been processed thru our wash plant and contains particle sizes within the following ranges. 99% passing #4 sieve and less than 1% passing #200 sieve. This product is used primarily for state mix design asphalt projects.

North Alabama Sand & Gravel has been supplying the ready mix industry with their natural sand needs for over a decade.

Click Here for Ready Mix Product Photos

Product 102 - Concrete Sand AHD-100: (1/4" to #100)
This is a clean natural sand product that has been processed through our wash plant and meets all requirements under Alabama Department of Transportation Section 802 Fine Aggregates, Alabama Department of Transportation Section 249 Quality Control Program and ASTM International Section C33 Fine Aggregates Specifications. Our concrete sand typically has a running FM of around 2.40  This product is used primarily as a fines aggregate in the production of ready mix concrete used throughout the construction industry to produce footings, foundations, slabs, sidewalks, concrete interstate , bridge piers, columns, decks, etc.
2008 Concrete Sand Certification               ALDOT Approved Source ID Number               MSDS Sheets

Sieve Analysis 5/30/08               Sieve Analysis 5/19/08 

Sieve Analysis 5/9/08              Sieve Analysis 5/6/08               Sieve Analysis 1/16/08 

Sieve Analysis 1/4/08              Sieve Analysis 12/19/07              Sieve Analysis 11/27/07

Sieve Analysis 11/8/07              Sieve Analysis 10/30/07              Sieve Analysis 10/1/07